technosoundz

Granular synthesis: A guide to what it is and how to use it

Granular synthesis: A guide to what it is and how to use it

Illustration: George Wylesol

Sometimes, this involved taking that sound apart and looking at it through a new (and microscopic) lens—this is where granular synthesis comes in.


What is granular synthesis?

Granular synthesis refers to a number of techniques that adjust and reorder small segments of a longer sound to produce a unique output, usually using raw audio as the input. Think of a ‘grain’ as one of these small segments—a sample of a sample that’s usually between 10 – 50 milliseconds in duration (but by no means limited to it).

By operating on a more microscopic time scale, granular synthesis becomes a powerful tool for time stretching and pitch shifting audio. Tools like Celemony’s Melodyne, Ableton Live’s warping functionality, and Splice’s new Astra synthesizer employ granular techniques to great effect. That said, its creative possibilities can also extend much further.


How to use granular synthesis

To get a better sense of just how powerful granular synthesis can be, let’s try and transform an unconventional audio sample into something that’s much more musical. I’ve selected Robert Henke’s Granulator II as the vehicle for our journey because it’s set up in a very similar way to Ableton Live’s stock Sampler plugin, packs a huge punch, and, best of all, is a free Max for Live device.

From a pan to a pad

Below is a short musical arrangement I created using only granular synthesis:

You might be surprised to learn that the source audio for this entire piece is nothing more than a two-second hit of a frying pan. That’s the magic of granulation; you can transform an ordinary object from your kitchen into an immersive soundscape.

So, let’s walk through how this sound came to be, step-by-step. The first thing we’ll do after dropping this sample into Granulator II is take a look at some key parameters and understand how they shape playback. Make sure to hook up this track to your keyboard or fill up a MIDI clip with some notes beforehand.

Grain

This parameter controls both how often audio grains are being triggered, and how long those grains are. As you slowly turn up the Grain frequency, you can both see and hear the zone of playback shrink and the rate of playback increase. Higher values make things increasingly glitchy and frantic, and something like 130 Hz lets you essentially turn the sample into its own single-oscillator synth with a defined pitch.

Since we’re going for something that’s a bit smoother here, I’m going to leave the Grain value pretty low, at around just 6 Hz. I’ve also dialed Spread to around 60, which creates slightly different grain sizes for the left and right channels and gives everything a wider, stereo feel.

make-it-grain-grain
File Position

These next two parameters are incredibly fun to use and vital for getting that organic pad sound. File Position controls where each grain will start playing from, which is why you can hear the initial transient (the metallic hit of the frying pan) when it’s set to zero.

By moving the position forward, this transient fades away and we’re left with more of the sample’s decay tail, which is made up of all the resonating sounds from after the pan was hit. For this example, I’ve set the File Position to around 22 to capture the smoothest parts of the sample.

Spray

Now, here’s where things really get interesting. Spray introduces some good old randomness into the mix by varying the File Position parameter from earlier. Start turning the knob, and you’ll notice how the vertical playback lines in Granulator II begin to trigger outside of the orange boundaries defined by the Grain parameter.

I was pretty conservative with this for my own sound, setting it to only 32 ms. That said, you can really have some fun here by increasing it way past that point in order to pick up little features from all across an input sample (you can even assign an LFO to control it). Seriously, it’s a blast.

make-it-grain-in-post-file-position
Envelopes, filters, and more

This pad is starting to come together, but we’ll adjust a few more knobs and buttons to get it sounding dynamic and polished. One thing you can do is click on the light blue Grain button at the left of the plugin window, in order to change over to the Filter view. Here, we can actually adjust the amplitude envelope of each grain to make things even smoother by increasing the Attack, Decay, and Release values. I’ve also added some frequency modulation, applied a low-pass filter, and increased the decay value of the Filter / FM Envelope to tone down the harshness of the frequency modulation after each new note.

Lastly, I automated both the frequency of the low-pass filter and the FM value to make my final arrangement more dynamic. Assigning parameters like these (as well as all the ones I’ve touched on so far) to macro knobs that you can control on the fly will make exploring new sounds incredibly fun and tactile.

make-it-grain-in-post-02

No grain, no gain

And there you have it—an ethereal, evolving pad made using granular synthesis and an unassuming foley one-shot. There are infinite possibilities for sound design using this technique, and the sky’s the limit when it comes to what audio you can throw in, from recorded vocals to rainfall. So, go ahead and make it grain.

Do you have any questions about granular synthesis? What other topics in music production would you like to see us explore next? Start a conversation with us on the Splice Discord.


Dive deeper into the world of granular synthesis with the dedicated oscillator in Astra, Splice’s new synth available in the Creator and Creator+ plans:

November 16, 2022

https://splice.com/blog/wp-content/uploads/2020/01/granulator-post-1.mp3

TechnoSoundz is a news aggregation service provided by Lemuria Live, LLC. Here is Original Source of this article. SSR002 – Russ Urban – Funky 4 Play

Latest Posts

Share this post:

Signup for the news letter because you need more news.